After the FX2-Dominator assessment, we’re again with one other AKK FPV transmitter assessment. Contrary to its a lot highly effective brother, the AKK Race VTX is appropriate for low profile racing drones, the place house is important. In addition to the ultra-thin design, it comes with a number of cool options and pleasant price ticket.Speaking from my very own expertise, with regards to constructing your individual FPV drone it is extremely essential to seek out the appropriate half for the job on the lowest worth doable. For instance, if you wish to constructed a 100 bucks racing drone, you’ll not afford to pay half of the challenge’s budged just for an extremely high-end VTX. Also, should you want a brilliant skinny video transmitter, you’ll skip over those with heat-sink and standing LCD. Of course, apart from worth and type issue, transmission energy and different options are essential as properly.Sponosored ADAKK RaceVTX options & specsUltra-thin design, solely 3.5 mm;Switchable broadcast energy (25/200mW);PIT mode (low transmission energy);Slow energy ON;On-board microphone;Status LED indicators;One button frequency and energy setup;Smart Audio (distant VTX management);5V out for digital camera;Included MMCX antenna pigtail;Optional SMA or RP-SMA plug.AKK Race VTX assessment with professionals & consDisclosure: I acquired this 5.8G video transmitter as a part of a product assessment collaboration with AKK Tech. Although the VTX was provided free of charge, all ideas on this article stay my very own and I used to be under no circumstances influenced by the sponsor.I acquired the AKK Race VTX about two weeks in the past along with the beforehand talked about FX2-Dominator. In order to maintain the product worth as little as doable, it comes solely in anti-static bag, as a substitute of the same old AKK field. Besides the VTX module, the bag comprises a MMCX antenna pigtail and a tiny consumer handbook.At a lookThe module itself measures 20 x 25 mm and has a max top of simply 3.5 mm. Practically can’t be achieved a thinner VTX because of the thickness of the MMCX connector. All the digital elements, together with management button, standing indicators and microphone, are on the entrance half. From as much as down you may have the next LEDs: Band indicator, Channel indicator, Power/25mW and Power/200mW.The module comes with pre-soldered wires (about 8cm lengthy). You have black and crimson wires for energy enter, respectively inexperienced for TBS, yellow for Video-IN, black for digital camera GND and crimson for digital camera energy.As there aren’t any mounting holes you will have some double-sided tape or zip-ties to put in the AKK RaceVTX onto your drone.Transmitting energy and frequencyThe AKK Race VTX options twin energy mode. According to your wants, you may toggle between 25mW and 200mW energy, because of TBS SmartAudio even remotely through BetaFlight OSD.From the doable 40th transmission channels (8 channels x 5 bands), on account of FCC rules, solely 37CH will be set (E4, E7 and E8 are disabled).Pricing & AvailabilityAt the time I’m publishing my assessment, the AKK Race VTX is listed on producer’s web site for under $9.99. According to your antenna connector, you may have two choices: SMA or RP-SMA model.Editor’s scores Price/worth ratio Power/Weight ratio Features RangeVerdictOverall, I favored the AKK Race VTX. It is a brilliant low-cost, mild and skinny FPV transmitter. It has built-in microphone, standing LEDs and TBS SmartAudio.My solely complain is concerning the enter voltage. Cannot be powered straight from the primary battery. It accepts 5V solely.ProsUltra-thin, appropriate for tight builds;Extremely pleasant worth;Lots of options (SmartAudio, Adjustable Power and On-board microphone).ConsCan be powered by 5V enter solely (no built-in DC/DC step-down);Not stack-able.Photo gallery