Why you may belief TechSwitch
We spend hours testing each services or products we evaluate, so that you might be positive you are shopping for the most effective. Find out more about how we test.
Epson Pro Cinema LS9000: One minute review
The Epson Pro Cinema LS9000 is the newest, and least costly, member of Epson’s LS sequence of projectors. At $3,999 / £2,999 / AU$7,299, this entry-level devoted residence theater projector is notably cheaper than comparable choices from JVC and Sony, but nonetheless comes with a bevy of nice options and efficiency to match.
Similar to the step-up LS12000, the Pro Cinema LS9000 supports 4K 120Hz indicators, has comparatively low enter lag for gaming, and is appropriate with the HDR10+ high dynamic range format. Its motorized lens shift, zoom, and focus make setup changes simple, and out of the field in Natural image mode, it delivers correct colours and a crisp picture.
Even with all the nice inclusions, some lacking options mirror the LS9000’s entry-level standing. The most obvious is a scarcity of dynamic tone mapping, which can be lacking from the opposite LS sequence projectors that had been initially launched a number of years in the past, however is beginning to present up in some cheaper residence theater fashions. With a rated 2,200 lumens brightness (white and shade), it’s additionally finest suited to a house theater room with respectable ambient gentle management, versus a multi-purpose dwelling area with gentle streaming in by means of home windows.
Still, the Epson Pro Cinema LS9000 affords unimaginable efficiency for the value. It’s a strong projector that’s simple to arrange, however nonetheless affords the flexibility to tweak and play with picture settings {that a} new (or frugal) residence projection fanatic is certain to like.
Epson Pro Cinema LS9000 review: Price & release date
- Release date: July 2025
- Price: $3,999 / £2,999 / AU$7,299
The Epson Pro Cinema LS9000 made its debut in July 2025 at the Audio Advice Live show in Raleigh, North Carolina. It’s the least expensive of Epson’s Pro Cinema laser projectors, coming in at $3,999 / £2,999 / AU$7,299. For comparison, the Home Cinema LS11000 retails for $4,499 (up from $3,999 when released) and the LS12000 now goes for $5,999 (up from $4,999 at release).
Epson Pro Cinema LS9000 review: Specs
|
Screen sizes supported: |
50-300 inches |
|
Brightness (specified): |
2,200 Lumens |
|
HDR support: |
HDR10, HDR10+, HLG |
|
Optical technology: |
3LCD laser diode |
|
Smart TV: |
N/A |
|
Connections: |
2x HDMI 2.1 (one with eARC), 2x USB-A (one 300mA for optical HDMI power, one 5V/2A for power and firmware), Mini USB (service), RJ45 (control), RS-232c, 3.5mm (12V trigger) |
|
Dimensions (H x W x D): |
7.6 x 20.5 x 17.6 inches (193 x 520 x 447mm) |
|
Weight: |
28 pounds (12.7kg) |
Epson Pro Cinema LS9000 review: Design & features
- Motorized zoom, focus, and lens shift
- 4K 120Hz support
- Motorized lens cover
The Epson Pro Cinema LS9000 shares the same look as its bigger siblings, the Pro Cinema LS12000 and Home Cinema LS11000, and the high-lumen Epson QB1000 released in late 2024. The chassis is large and a bit heavy (the Sony Bravia Projector 7 weighs less, but the JVC DLA-NZ5 weighs a little more), but I find the design and its black color to look sleeker than its heft lets on. All connections are on the back panel alongside touch controls if the remote is misplaced.
The look is not where the similarities to the LS11000 and LS12000 end. Inside, the LS9000 uses the same VRX lens with a 15-element glass structure and has Epson’s 4K 3LCD design architecture with three 0.74-inch LCD panels.
As is the case with all Epson projectors, the LS9000 uses pixel-shifting technology to achieve a 4K resolution from 1080p chips. Some enthusiasts complain about this not being “True 4K” and as lesser than the use of native 4K chips, but the 4K image from the LS9000 (and every other Epson that uses pixel-shifting technology) is detailed and crisp, especially from a normal viewing distance. The chip also allows for a maximum refresh rate of 120Hz.
The laser light source is specified for 2,200 lumens of both color (IDMS rated) and white (ISO rated) light output and has up to 20,000 hours of life in all modes. This is where the LS9000’s performance separates from the LS11000 and LS12000, which are rated at 2,500 and 2,700 lumens, respectively, and partially accounts for the difference in pricing. The blue laser diode array emits light through a fixed yellow phosphor (first released with the LS12000), as opposed to a phosphor wheel, to create white light, and the laser light source and fixed phosphor allow it to run silently.
The lower lumen output makes the LS9000 more suitable for a dark room – or at the very least, a light-controlled room — than the more expensive, higher light output projectors. But as I’ll discuss below, it still delivers enough brightness for daytime viewing.
There’s a generous +/- 24% horizontal and +/- 96% vertical powered lens shift on the LS9000, along with powered zoom (a ratio of 1-1.2) and focus that can be controlled from the remote to make setup adjustments easy. The projector’s throw ratio is 1.35-2.84:1. There’s also vertical and horizontal keystone correction (+/- 30 degrees), but with the amount of lens shift available, keystone correction likely won’t be necessary (and should always be avoided, if possible, as it can negatively affect the picture).
The LS9000 is compatible with an anamorphic lens kit (sold separately) and third-party options. A memory feature allows you to save image adjustments and lens positioning for different aspect ratio setups, and the lens is also protected by a motorized lens cover that opens and closes with the power cycle.
The LS9000 supports HDR10, HLG, and HDR10+ high dynamic range, and has two HDMI 2.1 inputs that support 4K 120Hz. While that’s great news for gamers, the projector doesn’t support ALLM, so you’ll need to manually switch the image processing from Fine to Fast for the lowest input lag. HDMI2 also supports eARC, so if you decide to connect a streaming stick directly to the projector, you can send out audio including Dolby Atmos, Dolby TrueHD, DTS Master Audio, and DTS:X formats.
One thing missing from the Epson Pro Cinema LS9000 is dynamic HDR tone mapping. Instead, there’s an HDR Dynamic Range slider that allows you to manually adjust the brightness of the HDR image.
The projector’s remote is a bit chunky, but the keypad is backlit and has all the necessary buttons to make easy adjustments while viewing. There are dedicated buttons to call up features like Fine/Fast (for gaming), different lens memory positions, signal information, lens adjustment, and color modes.
- Design & features score: 4.5/5
Epson Pro Cinema LS9000 review: Picture quality
- Accurate image in Natural picture mode
- HDR10+ support
- No dynamic tone mapping
The LS9000 has five different picture modes — Dynamic, Vivid, Bright Cinema, Cinema, and Natural — and they are the same for both standard and high dynamic range sources. Each mode produces a watchable image out of the box, although all of them have some degree of blue tint to the grayscale, with Natural being the most accurate choice for both SDR and HDR.
The default color temperature setting of 6500K is still slightly on the blue side, but switching it to 6000K causes the color temperature to be a little too red. If you choose to do a professional calibration, you can use two different picture modes – one for SDR and one for HDR – and save them with the Image Memory setting.
Out of the box SDR measurements in Natural picture mode had an average Delta E of 2.8, with some grayscale reaching above 4 because of the blue bias. A calibration can get all dE down below 2.1, with many under 1. UHDA-P3 color gamut coverage measured 90.25%, while BT.2020 came in at 66.86%.
Brightness in Dynamic mode with my unit was 2,062 lumens, but that’s still within the measurement tolerance of ISO lumens, and due to the positioning of my projector, the image was zoomed in a bit, which causes the brightness to come down. It’s enough brightness for a watchable image in a room with ambient light (even with Natural picture mode, which is visibly less bright than other modes), but there’s a loss of shadow detail due to the light reflecting on the screen.
Where the projector really excels is when the lights are off. Colors look accurate and inviting, detail in both SDR and HDR is sharp, and the projector exhibits great contrast and shadow detail with the Dynamic Contrast setting at High Speed. The contrast isn’t as impressive as on the LS12000, which I evaluated a few years ago, but for the price, the LS9000 does an excellent job.
The HDR image does require some tweaking at times. Occasionally, bright highlights can cause some clipping — such as when the shark cage is lowered into the water in The Meg, and we will see the intense solar refracting by means of the ocean water. In this occasion, I adjusted the dynamic vary slider from its default of 8 to 10 (which barely backs off the scene brightness).
Through most of my viewing, I performed round with the slider, not simply to handle excessive brightness clipping, but in addition to see its impact on picture depth. Generally, I discovered myself setting it between 8 and 10, with the Battle of Pelennor Fields in Return of the King at 8 and day scenes throughout Mad Max: Fury Road at a 9 for a bit extra depth. None of the changes had been life-altering, and I wouldn’t recommend altering the dynamic vary slider mid-movie, however you’ll study your preferences. This is the place dynamic tone mapping is missed.
Home theater projectors have traditionally struggled to supply enter lag low sufficient for gaming, however with two HDMI 2.1 ports which are able to 4K 120Hz, the LS9000 is screaming for use as a gaming projector. The Image Processing menu means that you can choose a setting of Fine or Fast (which supplies a decrease enter lag). With the Fast setting and a 4K 60Hz sign, the lag measured at 20ms (it’s 44ms with the Fine setting). Unfortunately, there’s no ALLM (Auto Low Latency Mode), so that you’ll must manually swap the setting whenever you sport or watch content material.
Input lag is low sufficient on the LS9000 to fulfill a non-competitive gamer (my son nonetheless loved his time enjoying Minecraft). During my second playthough of Clair Obscur: Expedition 33, which depends on dodge and parry reactions throughout fight, I used to be in a position to nonetheless make it by means of fight with out situation. Someone who often performs first-person shooter video games will seemingly really feel a distinction between the LS9000 and among the best gaming TVs, however for the overwhelming majority of us, the Epson will ship a terrific gaming expertise.
- Picture high quality rating: 4.5/5
Epson Pro Cinema LS9000 review: Value
- Great performance for the price
- Solid gaming projector
- Missing an important home theater feature
The Epson Pro Cinema LS9000 is not only the least expensive model in the LS series, it’s one of the most affordable premium home theater projectors – the JVC DLA-NP5, which is a lamp-based model, retails for $6,000, as does the Sony VPL-XW5000ES, which came out three years ago.
Not only is the LS9000 brighter than both of those projectors, it also has a collection of features neither of them has, including a high-quality laser light engine, HDMI 2.1 ports with 4K/120Hz and eARC support, an excellent lens with motorized adjustments and lens cover, zoom and image memory, and 2,200 lumens of brightness.
There are still some compromises that must be made. Its biggest flaw is a lack of dynamic tone mapping, which we’re seeing in projectors half the price of the LS9000, like the Valerion VisionMaster Pro2. The LS9000 also doesn’t have 3D support, isn’t as bright as the step-up options from Epson, and is missing ALLM for gaming. But even so, the projector delivers a detailed picture with accurate color, which looks very engaging in a dark room. Also, the 20ms input lag time and 4K 120Hz support make gaming a joy on the big screen.
Should I buy the Epson Pro Cinema LS9000?
|
Attributes |
Notes |
Rating |
|---|---|---|
|
Design and features |
Motorized zoom, focus, and lens shift, along with 4K 120Hz and HDR10+ support |
4.5/5 |
|
Picture quality |
Accurate color in Natural mode, along with solid contrast, fine 4K picture detail, and low input lag for gaming |
4.5/5 |
|
Value |
A very good value compared to other 4K home theater projectors, most of which cost several thousands more |
4/5 |
Buy it if…
Don’t buy it if…
Also consider
| Header Cell – Column 0 |
Epson Pro Cinema LS9000 |
Epson Pro Cinema LS12000 |
JVC DLA-NZ700 |
Sony Bravia Projector 7 |
|---|---|---|---|---|
|
Price: |
$3,999 |
$4,999 |
$8.999 |
$9,999 |
|
Screen sizes supported: |
50-300 inches |
50 to 130 inches |
30 to 150 inches |
90 to 130 inches |
|
Brightness (specified): |
2,200 lumens |
2,500 lumens |
2,300 lumens |
2,200 lumens |
|
HDR support |
HDR10, HDR10+, HLG |
HDR10, HDR10+, HLG |
HDR10, HDR10+, HLG |
HDR10, HLG |
|
Optical technology: |
Laser 3LCD |
Laser 3LCD |
Laser D-ILA |
Laser SXRD |
|
Smart TV: |
n/a |
n/a |
n/a |
n/a |
|
Connections: |
2x HDMI 2.1 (1 with eARC) |
2x HDMI 2.1 (1 with eARC) |
2x HDMI 2.0 |
2x HDMI 2.1 |
How I tested the Epson Pro Cinema LS9000
- Evaluated under various viewing conditions
- Measured and calibrated with professional software and hardware
- I am ISF-certified and have years of experience reviewing projectors
The Epson LS9000 laser projector was connected to my ceiling mount, approximately 11 feet from an Elite Screens CineTension 3 ISF-certified CineWhite screen. Using the Epson’s zoom and lens adjustment controls, the image was adjusted to fit the 100-inch diagonal screen.
I watched a wide range of content with both ambient light from the sun and ceiling lighting during the day and a dark, light-controlled environment at night. Movies and TV shows were streamed with an Apple TV 4K from the Disney+, HBO Max, and Hulu apps. I additionally used a Kaleidescape Strato V for high-quality film playback, together with 4K Blu-ray discs performed on an Oppo UDP-203 disc participant. Games had been performed on an Xbox Series X.
For goal measurement testing, I used an X-rite i1 Pro 3 spectrophotometer, Murideo Seven-G 8K sample generator, Konica Minolta LS-100 luminance meter, and Calman calibration software program by Portrait Displays. Input lag exams had been made with a Leo Bodnar 4K lag tester.
I’ve been testing projectors and different shows for a few a long time, and am an ISF Level III licensed calibrator.